Saturday 23 January 2016

How to fit a latch and an interior Door Handle?


Are you willing to Buy Cupboard Handles and even door handles? Are you stuck with any of your concerns regarding how you are going to fit an interior door handle?  You just happened to be at the right place as here you will be getting a complete how to guide of how exactly you are going to do this;
Fit the latch:
Having the door closed, you will first have to mark the center of the existing latch cap on the face of the door. Using the measuring tape, you will be transferring this mark to the edge of the door and mark the center point. For all the obvious reasons, the perfect centralization is really important and you must not compromise with this.
Drill a Hole:
Following this you will have to drill a hole in the door edge with the correct size as it can lead to the outsized measurement. While drilling, you will also have to make sure that the hole is of required size as of latch.
Position the Latch:
Settle the latch or the lock into the drilled hole and simply draw around its boundary that will enable you to have the perfect measurement of what you are doing actually. Since you have got the drawn boundaries, you simply take the latch off and it’s time to use the chisel. You will actually be making chisel cuts around the pencil outline. While cutting, you will need to be very careful as this particular job requires you have perfect but smooth hands over.
Drill Front-Hole:
For that, you are required to transfer the measurement to the face of the door central to the hole you have measure for the latch barrel. Simply then, you will be using this mark as a center point and then you are good to go with the drilling thing. After drilling you will simply place the latch in position and fit in perfectly.
Final Fitting:
At last, you are simply required to Buy Online Door Hardware and shop a perfect handle for you from the best provider. Just fit the handle without damaging the latch and you are simply good to go with perfect fitted interior door handle.

0 comments:

Post a Comment